Scott Voodoo NTN doesn't fit outlaw x binding

This is the World Famous TelemarkTalk / TelemarkTips Forum, by far the most dynamic telemark and backcountry skiing discussion board on the world wide web. We have fun here, come on in and be a part of it.
User avatar
Teledrou
Posts: 12
Joined: Wed Nov 18, 2020 10:03 pm

Scott Voodoo NTN doesn't fit outlaw x binding

Post by Teledrou » Wed Nov 18, 2020 10:12 pm

I have just bought both Voodoo boots and outlaw x binding from 22 design. I can't snap the boot in the binding. The size of the boot is 27.5 and the size of the binding is large. Do you have any clue why that does not fit?

User avatar
voilenerd
Posts: 80
Joined: Fri Oct 05, 2018 9:26 am

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by voilenerd » Thu Nov 19, 2020 1:33 pm

Odd, I know some of the Crispis were out of spec that had similar problems with some NTN bindings. Can you post a pic or two?





User avatar
Teledrou
Posts: 12
Joined: Wed Nov 18, 2020 10:03 pm

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by Teledrou » Thu Nov 19, 2020 2:22 pm

Here is the picture. Is there something that I can do to fix this issue?
Both the boot and the binding are new.
here a link for the video
IMG_20201116_180700253.jpg
IMG_20201115_104749080.jpg





User avatar
voilenerd
Posts: 80
Joined: Fri Oct 05, 2018 9:26 am

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by voilenerd » Thu Nov 19, 2020 4:42 pm

Bummer. To me it looks like the outlaw is the wrong size of binding and it’s a small not a large. May of been mix up on order or box was miss labeled.

I’d contact 22 designs or who ever you got bindings/skis from for next steps. By the way do the boots fit you okay? Did you try a shell fit and make sure they aren’t too big?





User avatar
Montana St Alum
Posts: 286
Joined: Thu Oct 22, 2020 6:42 pm
Location: Wasatch, Utah
Ski style: Old dog, new school
Favorite Skis: Blizzard Rustler 10
Favorite boots: Tx Pro
Occupation: Retired, unemployable

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by Montana St Alum » Thu Nov 19, 2020 4:45 pm

voilenerd wrote:
Thu Nov 19, 2020 4:42 pm
Bummer. To me it looks like the outlaw is the wrong size of binding and it’s a small not a large. May of been mix up on order or box was miss labeled.

I’d contact 22 designs or who ever you got bindings/skis from for next steps. By the way do the boots fit you okay? Did you try a shell fit and make sure they aren’t too big?
That's exactly what it looked like to me as well.
Fortunately (I think) the small and large both use the same drill pattern up front.
Last edited by Montana St Alum on Thu Nov 19, 2020 4:50 pm, edited 1 time in total.





User avatar
Holzinger
Posts: 12
Joined: Fri Dec 27, 2019 11:25 am

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by Holzinger » Thu Nov 19, 2020 4:47 pm

No help. But in the pic, I do notice the mandatory ale necessary to figure these things out...
Go your own way, the lines are shorter...





User avatar
bauerb
Posts: 428
Joined: Sun Dec 08, 2019 10:37 am

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by bauerb » Thu Nov 19, 2020 5:40 pm

do you have the same problem with both skis, or just 1? as an experiment, try putting the binding into tour mode, which relaxes the spring a bit and moves the claw back a tiny amount. it doesn't solve the problem, but might indicate you have defective springs.





User avatar
Teledrou
Posts: 12
Joined: Wed Nov 18, 2020 10:03 pm

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by Teledrou » Thu Nov 19, 2020 7:56 pm

I have already contacted 22 design but they have not solved my issue yet. I think I've got the wrong size as well but I have no clue what is the difference. Someone knows what is the difference between large and small in term of dimensions?





User avatar
Teledrou
Posts: 12
Joined: Wed Nov 18, 2020 10:03 pm

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by Teledrou » Thu Nov 19, 2020 7:56 pm

bauerb wrote:
Thu Nov 19, 2020 5:40 pm
do you have the same problem with both skis, or just 1? as an experiment, try putting the binding into tour mode, which relaxes the spring a bit and moves the claw back a tiny amount. it doesn't solve the problem, but might indicate you have defective springs.
Yes, I do have the same issue with both binding.





User avatar
Teledrou
Posts: 12
Joined: Wed Nov 18, 2020 10:03 pm

Re: Scott Voodoo NTN doesn't fit outlaw x binding

Post by Teledrou » Thu Nov 19, 2020 7:58 pm

Holzinger wrote:
Thu Nov 19, 2020 4:47 pm
No help. But in the pic, I do notice the mandatory ale necessary to figure these things out...
I have drunk a lot of bear since I got the binding.... It is really helpfull!





Post Reply