Scott Voodoo NTN won’t lock into Outlaw X

This is the World Famous TelemarkTalk / TelemarkTips Forum, by far the most dynamic telemark and backcountry skiing discussion board on the world wide web. We have fun here, come on in and be a part of it.
User avatar
Posts: 139
Joined: Thu Oct 01, 2015 10:00 pm
Location: Drink Moxie

Re: Scott Voodoo NTN won’t lock into Outlaw X

Post by dnt_upton » Thu Feb 20, 2020 6:10 pm

And having Dynafit licensed fittings also doesn't mean that Scott, Crispi, or Scarpa will be consistent in setting the distance between the tech toes and the duck butt. Once a standard is established, then I assume they will be.

And as TomH notes, that's not the issue here.

User avatar
MSU Alum
Posts: 115
Joined: Wed Dec 23, 2015 6:33 pm
Location: Wasatch Back
Ski style: Old man - New school!
Favorite Skis: Rustler 10
Favorite boots: Crispi Evo
Occupation: Retired

Re: Scott Voodoo NTN won’t lock into Outlaw X

Post by MSU Alum » Thu Feb 20, 2020 9:07 pm

I was confusing the Outlaw X with the Lynx.

User avatar
Posts: 4
Joined: Sun Feb 14, 2021 11:18 am

Re: Scott Voodoo NTN won’t lock into Outlaw X

Post by TeleForce » Wed Apr 21, 2021 10:20 am

After frustration with trying to step into an Outlaw X binding with my Voodoo boots I did some engineering and solved the issue. See below. Scott told me to just file away some material from the duck butt adapter. They didn't say where or how much. After some measuring, observing and testing in the garage I came up with the fixes below.

1) File extra material away from tech inserts. Aids ease of insertion into the toe.
2) Radius the Duck butt adapter. The edges are what miss the Outlaw Claw.
3) Assemble the duck butt as far toward the toe as possible. I measured the Voodoo at 178mm and the Scarpa at 176mm.
4) Sticky claw fix by filing the claw. This is a known issue.

With the above fixes the step in ease into an Outlaw X is greatly improved.
Scott Boot Bottom.jpeg
Scott Boot Toe.jpeg

Post Reply