has anyone figured out a permanent fix for holes worn in boot bellows?

This is the World Famous TelemarkTalk / TelemarkTips Forum, by far the most dynamic telemark and backcountry skiing discussion board on the world wide web. We have fun here, come on in and be a part of it.
User avatar
bauerb
Posts: 732
Joined: Sun Dec 08, 2019 9:37 am

has anyone figured out a permanent fix for holes worn in boot bellows?

Post by bauerb » Fri Nov 20, 2020 10:40 am

so my scarpas have a hole worn in the bellow about the size of a dime. as you can see in the pic, my "fix" is applying duct tape, which lasts 1-2 max. I was thinking about getting some Flex Seal, or gasket repair goop. seems like anything short of an aluminum patch bonded on will just wear through very quickly. has anyone found a solution? I saw that Crispi makes a "bellows protector plate"....
boot hole.jpg

User avatar
connyro
needs to take stock of his life
needs to take stock of his life
Posts: 1233
Joined: Mon Jan 26, 2015 11:46 am

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by connyro » Fri Nov 20, 2020 10:46 am




User avatar
bauerb
Posts: 732
Joined: Sun Dec 08, 2019 9:37 am

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by bauerb » Fri Nov 20, 2020 11:21 am

looks like the right sort of composite. how does it hold up to ski tip rub?



User avatar
connyro
needs to take stock of his life
needs to take stock of his life
Posts: 1233
Joined: Mon Jan 26, 2015 11:46 am

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by connyro » Fri Nov 20, 2020 4:21 pm

bauerb wrote:
Fri Nov 20, 2020 11:21 am
looks like the right sort of composite. how does it hold up to ski tip rub?
I've used it on ski tips where the edges were worn or chopped up and it works ok. There's probably better products out there for that use though. What's nice about sugru is that it's moldable and flexible while it still holds tight like glue. If you look online you can find recipes for homemade sugru but it's not quite as good as the real thing but for most uses it's good enough.



User avatar
fisheater
Posts: 2510
Joined: Fri Feb 19, 2016 8:06 pm
Location: Oakland County, MI
Ski style: All my own, and age doesn't help
Favorite Skis: Gamme 54, Falketind 62, I hope to add a third soon
Favorite boots: Alpina Alaska, Alico Ski March
Occupation: Construction Manager

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by fisheater » Fri Nov 20, 2020 4:45 pm

Very cool stuff ! Thanks for posting Conny.



User avatar
Stephen
Posts: 1451
Joined: Thu Aug 06, 2020 12:49 am
Location: PNW USA
Ski style: Aspirational Hack
Favorite Skis: Armada Tracer 118 (195), Gamme (210), Ingstad (205), Objective BC (178), Nordica Enforcer 94
Favorite boots: Alfa Guard Advance, Scarpa TX Pro
Occupation: Beyond
6’3” / 191cm — 172# / 78kg, size 47 / 30 mondo

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by Stephen » Fri Nov 20, 2020 5:30 pm

Some plastics are “low surface energy” and are difficult to bond. There are ways to improve bond. One way is flame treatment.
https://www.masterbond.com/resources/su ... n-plastics
FWIW...
That Sugra stuff looks awesome. Could be many uses for that.



User avatar
fgd135
Posts: 470
Joined: Sun Jan 19, 2020 2:55 pm
Location: Colorado
Ski style: Yes, sometimes.
Favorite Skis: Most of them
Favorite boots: Boots that fit
Occupation: Yes

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by fgd135 » Sun Nov 22, 2020 1:22 pm

*Sugru does not bond to oily plastics like polypropylene, polyethylene or Teflon™."

Scarpa's are, I think, made from PU and PeBax. Unless someone here has tried it with good results on ski boots, I'd sure want to find out if Sugru will reliably adhere to those materials.
"To me, gracefulness on skis should be the end-all of the sport" --Stein Eriksen



User avatar
connyro
needs to take stock of his life
needs to take stock of his life
Posts: 1233
Joined: Mon Jan 26, 2015 11:46 am

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by connyro » Sun Nov 22, 2020 4:57 pm

fgd135 wrote:
Sun Nov 22, 2020 1:22 pm
*Sugru does not bond to oily plastics like polypropylene, polyethylene or Teflon™."

Scarpa's are, I think, made from PU and PeBax. Unless someone here has tried it with good results on ski boots, I'd sure want to find out if Sugru will reliably adhere to those materials.
I've used sugru on the bellow of my old garmont synergy's where I chopped it with my ski and it held for an entire season.



User avatar
satsuma
Posts: 188
Joined: Sat May 03, 2014 10:31 pm
Location: Walla Walla, WA
Occupation: retired(?) chemical engineer

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by satsuma » Sun Nov 22, 2020 5:22 pm

I haven't actually performed the repair, but I am a retired chemical engineer with some experience with urethanes. Urethane adhesives are generally capable of chemical reaction with residual groups on the surface of solid urethanes or Nylon, which should make them adhere better at least. Keep in mind, this is theory, I have not demonstrated.

I would suggest trying several layers of fabric (cotton or nylon), combined with a flexible, 2 part urethane adhesive such as #M DP604NS or DP640 (an Amazon reference below) , which are dispensed via a syringe kit. The adhesives have a one hour work time, so one can apply several layers at once.

Dry the surface before applying with a hair dryer or heat gun, as moisture will also react with the urethane. If you can, tape the inside of the hole first.




User avatar
bauerb
Posts: 732
Joined: Sun Dec 08, 2019 9:37 am

Re: has anyone figured out a permanent fix for holes worn in boot bellows?

Post by bauerb » Mon Nov 23, 2020 9:00 am

I like the direction this thread is going. we may end up with a solution. I was thinking of getting some JB Weld




Post Reply