Xplore screws sourcing
Xplore screws sourcing
Hey. I emailed Rottefella but have not received a response.
I have one of the first issue xplore bindings with tiny short screws. Where can I source longer screws that work with the binding hole cut-outs?
Thanks!
I have one of the first issue xplore bindings with tiny short screws. Where can I source longer screws that work with the binding hole cut-outs?
Thanks!
- JohnSKepler
- Posts: 568
- Joined: Thu Sep 08, 2022 6:31 pm
- Location: Utahoming
- Ski style: XCBCD
- Favorite Skis: Voile Objective BC, Rossignol BC 80
- Favorite boots: Scarpa F1 Bellows, Alpina Alaska XP
- Occupation: Rocket Scientist
Re: Xplore screws sourcing
I went with inserts and have a LOT of extra screws. If you can send a picture of your current screw and the length I can compare it to mine to see if it is any different. Let me know what you're measuring, whether it is the entire screw or just the length of the threads. I don't care which it is just so long as I know.
Veni, Vidi, Viski
Re: Xplore screws sourcing
Great. I will take a photo and post. Thanks!
- JohnSKepler
- Posts: 568
- Joined: Thu Sep 08, 2022 6:31 pm
- Location: Utahoming
- Ski style: XCBCD
- Favorite Skis: Voile Objective BC, Rossignol BC 80
- Favorite boots: Scarpa F1 Bellows, Alpina Alaska XP
- Occupation: Rocket Scientist
Re: Xplore screws sourcing
I'm about to dig out my ski stuff and start tuning. I don't know how many you need but I'm happy to drop enough for a set or two in a padded mailer and send 'em your way, gratis!
Veni, Vidi, Viski
- xcdnewb0313
- Posts: 38
- Joined: Fri Sep 08, 2023 5:00 pm
- Location: N. Kitsap County WA
- Occupation: Stay at home dad who enjoys writing, skiing, angling, & cycling - b.g. US Marine, Buddhist, & a mediocre vegan chef. Namaste ✌️
- Website: https://mountaintopcoding.dev
Re: Xplore screws sourcing
I picked these bindings up at REI for $60. They are missing one screw and the plastic screw covers... I would very much like to get a few extra screws. I was going to email Rotefella and ask for a few screws but since the OP didn't have any luck I won't waste my time.
- Maxwellian
- Posts: 11
- Joined: Sun Nov 03, 2024 6:05 pm
Re: Xplore screws sourcing
I’ve got an extra set if you still need some
- JohnSKepler
- Posts: 568
- Joined: Thu Sep 08, 2022 6:31 pm
- Location: Utahoming
- Ski style: XCBCD
- Favorite Skis: Voile Objective BC, Rossignol BC 80
- Favorite boots: Scarpa F1 Bellows, Alpina Alaska XP
- Occupation: Rocket Scientist
Re: Xplore screws sourcing
If you'd like me to toss a few in an envelope PM me your address and I'll get them in the mail.xcdnewb0313 wrote: ↑Sat Nov 02, 2024 9:42 pm
I picked these bindings up at REI for $60. They are missing one screw and the plastic screw covers... I would very much like to get a few extra screws. I was going to email Rotefella and ask for a few screws but since the OP didn't have any luck I won't waste my time.
-John
Veni, Vidi, Viski
Re: Xplore screws sourcing
Open here. Thanks so much. My screws are about 1\2 inch. Will pm my address. Thanks! Jefe
- Woodserson
- Posts: 2995
- Joined: Wed Feb 11, 2015 10:25 am
- Location: New Hampshire
- Ski style: Bumps, trees, steeps and long woodsy XC tours
- Occupation: Confused Turn Farmer
Re: Xplore screws sourcing
What length you using for the inserts? I just ordered Binding Freedom 10mm T20 Low-heads and wondering if I should step up to 12mmJohnSKepler wrote: ↑Mon Oct 28, 2024 12:57 pm
I went with inserts and have a LOT of extra screws. If you can send a picture of your current screw and the length I can compare it to mine to see if it is any different. Let me know what you're measuring, whether it is the entire screw or just the length of the threads. I don't care which it is just so long as I know.
(measured thread section only, not including head)
- Woodserson
- Posts: 2995
- Joined: Wed Feb 11, 2015 10:25 am
- Location: New Hampshire
- Ski style: Bumps, trees, steeps and long woodsy XC tours
- Occupation: Confused Turn Farmer
Re: Xplore screws sourcing
What length are your screws. I just bought 2 pairs and all the screws in both boxes are 16.3mm, though there is reference to longer 21.8mm screws in the mounting instructions.