My wife and I are about to purchase some XCD(BC) equipment. Our current gear in the BC arena is very old and or broken, so it's time.
For bindings, I see Rottefella makes the Rossi and Fischer BC bindings, and I guess there are manual and automatic, plus the "Magnum" size. But I also see "BCX". Are BCX any different than BC?
Also, I read the section on where to mount, which says what I already know - it's up to me. We are looking at skis with about 90mm shovels, leaning towards the downhill capability vs maximum kick and glide, so I'm concerned about mounting too far back. Been there, done that for three pin cable bindings, so any experience with mounting forward of the recommended center would be appreciated.
- XCD KNIGHT
- Posts: 1168
- Joined: Fri Aug 22, 2014 9:31 am
- Location: Rimouski, Québec
- Ski style: Nordic backcountry touring with lots of turns
- Favorite Skis: Fisher E99, Åsnes Ingstad & Cecilie, K2 Wayback 88
- Favorite boots: Crispi Sydpolen, Alico Teletour & Alfa Polar
- Website: http://living-laponia.tumblr.com
BCX is just a branding, I think FIsher uses it. I guess it mean Backcountry-Crosscountry. Who really knows? Its quite meaningless, so its the same as BC.
I will let others more keen on placement get back to you on that, but for what it worth, I dont recall anyone choosing to place a binding forward of balance point. that would be my personal forward limit.
- XCD KNIGHT
- Posts: 2408
- Joined: Thu Jan 01, 2015 7:20 pm
- Location: Stanley, New Brunswick, Canada
- Ski style: Nordic backcountry touring
- Favorite Skis: Asnes Ingstad BC; Asnes Gamme 54 BC; Asnes Storetind Carbon
- Favorite boots: Alfa Guard Advance BC; Alpina Alaska BC; Scarpa T4
- Occupation: Forestry Professional
Instructor at Maritime College of Forest Technology
Husband, father, farmer and logger
All NNN/NNNBC bindings are made by Rottefella in Norway- along with the outsoles- regardless of the boot manufacturer and the sticker on the binding.
I think the "BCX" moniker is a legacy of Fischer's internal classification of their offtrack/backcountry Nordic touring skis-
The term "BCX" used to distinguish the more traditional Nordic BC touring skis (e.g. E-89/E-99/E-109) from their wider, shaped compact-geometry "xcd" skis traditionally under the Fischer moniker "S-Bound". I notice that all of Fischer's offtrack/backcountry skis are now under the moniker "adventure"- which I suppose is less complicated- but also a bit confusing because the skis under that umbrella are VERY different.
Mounting point on Nordic touring skis-
(Please forgive if I blather on about stuff you already know...)
The traditional mounting point for a Nordic touring ski- regardless of whether it is for the track, offtrack or mountain touring- is balance point (BP). As an example of this- Asnes in Norway may be the only ski company left designing Nordic-downhill skis and they are designed to mount Nordic bindings at BP- even for downhill-specific performance.
The whole "chord-center" (CC) mounting is a thing of the Telemark-renaissance in North America. Mounting a traditional Nordic ski at CC can produce a mounting point forward of BP. Mounting a traditional Nordic ski forward of BP has a number of effects:
- increases grip- reduces glide- when XC skiing and climbing
- potentially improves turn initiation (depends on ski geometry)
- potentially increases tip-dive (depends on ski geometry)
It is important to recognize that mounting at CC is ENTIRELY arbitrary. There are many old-school and modern touring skis that have geometry that results in CC and BP being exactly the same- therefore, a CC mounting IS a BP mounting! Modern innovations of rocker-camber profiles and multi-point sidecuts and early taper essentially blow-up any of the classical assumptions one can make about moving forwards of BP with a Nordic binding...
Recent discussion on CC/BP mounting here: http://www.telemarktalk.com/viewtopic.php?f=1&t=1853
I have given up mounting at CC- and always start with the manufacturer's Nordic/Telemark mounting point- which is almost 100% BP for my all of my touring skis.
(BTW- I have recently tried Rotte's "Move" binding system for track skiing- it is WICKED for performance track skiing!)
What skis are you considering mounting? With NNNBC I presume? What is the manufacturers recommended mounting point?
Unashamed to be a "cross-country type" and love skiing down-hill.
- XCD KNIGHT
- Posts: 1918
- Joined: Wed Dec 18, 2013 6:11 pm
- Location: Quebec / Vermont
- Ski style: Dancing with God
- Favorite Skis: Redsters, Radicals, Objectives and all Asnes skis.
- Favorite boots: ALFA Guard Advance, Scarpa TX Comp
- Occupation: Full-time ski bum
Not all the time but yes, I sometimes do, for several different reasons depending on the ski itself. Going for BP is quite simple... It works for most people, but modern skis are so complex, fine-tuning the mounting point can be very, very fun and rewarding.
I sometimes like to move forward a few centimeters to compensate for the binding weight. So your skis are really on balance when you lift them. It makes a cool difference for touring, going uphill or breaking trails. Moving forward is also nice for carving certain skis. And on some others, balance point may be nice for XC for not appropriate at all for downhill...
Going for BP on everything doesn't make much sense to me... That is why I think adjustable plates are A MUST for every binding... Like the XCelerators and the Freerides... Please Rotte, we need BC FIS plates...!
"And if you like to risk your neck, we'll boom down Sutton in old Quebec..."
I am getting Fischer's in the Excursion 88s with probably Magnum BC bindings and Alpina Alaska boots. Looking for that middle ground between Tele, single camber skis w/skins and track skis without edges.
My fear of where to mount is from having a shop mount far too back for a 3 pin years ago. Hard to remember, but I think they mounted the pin line back of the balance point. So they were terrible for downhill. For tele skiing with cable bindings, my thoughts are the force while skiing is at the ball of the foot, not at the pins. So once I factored that into mounting location(and doing my own), telemarking was effortless. But I'm less clear on NNN-BC. I don't have the equipment yet, so I don't know what they recommend.
I wish those "move" bindings were available in BC. Seems THE answer. Adjustable bindings.
- XCD Enthusiast
- Posts: 33
- Joined: Wed May 15, 2019 6:33 am
- Location: Trondheim, Norway
- Ski style: Backcountry in the wild, cross country on trails
- Favorite Skis: BC: Åsnes Nansen; Groomed trails: Madshus Terrasonic, Atomic Sport Pro Skintec
- Favorite boots: Crispi Stetind
- Occupation: Geologist